Call us Today for a Free Quote!
One Industry Roofing strives to be your #1 choice in Dallas for Roofing work.
We always make it our goal to do the best work for the lowest possible price! We pride ourselves on our friendly and knowledgeable staff and look forward to helping you with your Roofing needs today. Be sure to use a coupon in the coupons section of our site when we show up to do the job! We give free estimates as well, so give us a call and we'll promptly come by and look at your job.
Our Services:
24 hour response to repair and maintenance needs. Certified with manufactures of all types of products. TPO, PVC, Modified Bitumen, BUR, Shingles and Coatings.
The California Energy Commission (CEC) created regulations to reduce California’s energy consumption and provide Energy Efficiency Standards for Residential and Nonresidential buildings that is formally titled “California Code of Regulations, Title 24, Part 6”. The Cool Roof Update adopted in 2005 further sets cool roof energy standards for design and construction of roofs in California. This new regulation added a prescriptive requirement for non-residential buildings with low slopes.
What does Title 24, Part 6 now require?
Prescriptive requirements to install roofing materials that have an initial solar reflectance of 0.70 or greater and an initial thermal emittance of 0.75 or greater. Aged reflectance and emittance values will become the standard for compliance in the future.
THERMOPLASTIC (PVC, TPO and Fleece Back)
Lightweight, reinforced, highly reflective, light colored membrane. Highly resistant to chemical atmospheres, ozone, ultraviolet light, tears and extreme weather conditions. Exhibits excellent fire resistance and seam strength due to heat welding
EPDM-
Lightweight, synthetic elastomer material. Resilient, tensile strength, elongation, resistant to ozone, ultraviolet light and ponding water
ROOF COATINGS-
Coatings are used for roof surfacing, maintenance or repair, weatherability, reflectivity, ultraviolet light protection or aesthetics to enhance the performance of the installed roof system
MODIFIED BITUMEN & BUILT-UP ROOFING-
Modified Bitumen: Composed of either asphalt reinforced with polyester or fiberglass and, in some cases, with factory-applied surfacing. Installed typically in multiple layers, resistant to heavy traffic, puncture and tears.
Built-Up: Multiple layers of felts, fabrics or mats saturated with bitumen installed rooftop. Can be surfaced with gravel, mineral cap sheets or smooth weather resistant coatings. Ideal for resisting mechanical damage.
|
 |
|
